Nozzles and Heads

SINGLE ADJUSTABLE JET NOZZLE
Single Adjustable Jets produces a delicate, clear stream of water. The  Jet comes with an integral adjustment feature to allow a variety of spray angles (0-15 degrees off center axis). Single Adjustable Jets are of three-piece machined brass construction,  orifice size, adjustable to 15 deg. off vertical in a 360 deg. cone, 3/8″, 1/2″, or 3/4″ (M) threaded connection.  Fine screening at the pump is recommended to minimize nozzle clogging. 

CASCAD JET (FOAM BUBBLER)
Bubbler Nozzle produces a mound of aerated water for small to medium displays. This nozzle is of cast bronze construction; integral swivel feature,  with 1″ (F) N.P.T. threaded connection.  This is a water level dependent nozzle that can be applied as a central or accent feature. Nozzle must be submerged 3″ in order to perform optimally

FOAM JET 
Foam jet Nozzle is a highly aerated, water-level independent nozzle.  This nozzle is available in 4 sizes.  The spray effect gives the appearance of a high-volume nozzle, while having a low water requirement.  This is a water level independent nozzle.

AERATING JET
Water Level Independent Aerating Nozzle produces an aerated column of water without relying on a specific water level.  It is constructed of copper and brass with Natural finish and a (F) N.P.T. connection. The RNA is available in five (5) sizes ranging from 1″ to 3″.Fine screening at the pump is recommended to minimize nozzle clogging.

LILY 
The lily Nozzle Series produces a clear, circular sheet of water.  The adjustable deflector cone permits a full range of patterns from full unbroken sheets to half broken sheets.  This nozzle is machined brass and copper construction. The lily has a fully adjustable 35 deg. deflector cone with a stainless steel lock nut and 1 1/2″ (F) N.P.T. connection.  A higher cone adjustment produces a fuller sheet of water with a smaller diameter.  This nozzle is available in nine (9) configurations.  Fine screening at the pump is recommended to minimize nozzle clogging.

BELL NOZZLE
The Bell Jet Nozzle is of machined copper and brass construction with adjustable top cone and a stainless steel adjustment set screw.  The unit is 12″ long, with 1″ (F) N.P.T. connection. The nozzle requires a non-turbulent water supply for optimum effect.  It is available in two (2) sizes: 1/2″ and 1″. Fine screening at the pump is recommended to minimize clogging of the nozzle.

FAN JE
The  Fan Jet Nozzle produces a clear, translucent fan-shaped display.  This jet is ideal when used a perimeter effect in a wind free location angled to 45 degrees.  The fan jet is constructed of machined cast bronze, with 3/32″ wide x 2 11/16″ long slot and 1″ (F) N.P.T. connection.  Fine screening at the pump is recommended to minimize nozzle clogging.

TULIP JET
The tulip Nozzle produces a clear, circular sheet of water. The adjustable deflector cone permits a full range of patterns from full unbroken sheets to half broken sheets.  This nozzle is machined brass and copper construction. The tulip has a fully adjustable 35 deg. deflector cone with a stainless steel lock nut and 1 1/2″ (F) N.P.T. connection.  A higher cone adjustment produces a fuller sheet of water with a smaller diameter.   

RAIN CURTAIN/LACE FOUNTAIN
The  Rain Curtain Assembly includes a stainless steel distribution manifold with inlets, hanger brackets, brass emitter jets spaced 1.5″ on center, spooled mylar lace  Additionally, lace tension weights and spacer rod material are provided for installation in the field. The Rain Curtain requires 100% filtered water to minimize nozzle clogging.  Design flow rate is approximately 1.5 Lpm per emitter.

DIAMOND JET
The Diamond jet is a radical arrangement of the nozzles in this fountain head creates an Flower Jet water shape. High level of manufacturing precision in combination with the brass construction makes a superior quality fountain head which produces a totally uniform pattern. Spectacular when multi-color illuminated. Fine screening at the pump is recommended to minimize nozzle clogging.

BALL JOINT
Ball Joint are used to align those jets and nozzles that do not have a swivel base incorporated and required directional adjustment beyond 5 to 15 degree of centreline.

MIST JET
Fog Jet is designed for low wind area. It's not to create great height, but rather large volume making it particularly suitable for architectural fountains.
Please bear in mind that when installed in outdoor fountains, due to the small weight of the droplet, the wind can easily "overflow" the water fountain; therefore, it should not be installed in wind area.

LAMINAR JET
Laminar jet is constructed of plastic and stainless-steel.  Nozzle produces a laminar water jet with cut-off function.  RGB lights are selectable with use of an appropriate DMX controller.  Water must be 100% filtered and clean to transport the light through the water.  On/off function must be controlled with programming in panel .This is a special order item and has a long lead time.  Due to control and filtration requirements, it is only available with purchase of complete fountain package.

BALL FOUNTAIN
Ball Nozzle creates a stunning spherical water pattern. Its uniform spray and balanced design deliver a graceful, eye-catching display. it performs reliably in both indoor and outdoor installations